Globalink Support
Globalink Support - Help Center


Globalink Voice-Over-IP (VOIP) Support EZ VoIP|Porta Switch |Setup

Home |Support| Devices |Setup |DID |FAQ |Download |VoIP Control Panel 



Please go to your reseller account page and find Customers on the menu bar. 

Choose  ip phone profile. 

Create your profile by entering your device hardware address (mac address) and device type. 

Once you have done the above, follow the steps below :-

STEP 1
You must first determine what IP address your linksys device was assigned.  You need to pick up the phone attached to the Line 1 jack and dial:

                         **** (four asterisks)

then dial:     110 #

and you will be told the IP address of your device (e.g. 192.168.1.100)

STEP 2
Please go to any browser on your computer which is on your network and enter the address:

                   http://<IP ADDRESS>/

(where <IP ADDRESS> is replaced by the address that was given to you in STEP 1.

example by typing http://192.168.1.100 


STEP 3

Please login as admin in advance mode and find the provisioning tab

Please do the following :-

Provision Enable equal to Yes
Resync on Reset equal to Yes
Profile Rule equal to http://157.238.178.69/SIPUpdates/Profiles/$MA.cfg

Save settings.


 

     
 
2725 Arnold Ave, Salina, KS 67401 • 785-823-8284 • Copyright © 2008 Globalink Inc.